Each Alexapure Pro filter is rated for up to 200 gallons of filtration*, depending on the quality of the water you’re filtering. You don’t have to keep track of every gallon—when you notice a significant decrease in flow rate, that’s a good indication it’s time for a replacement.

Replacement filters are sold separately, so you can keep extras on hand and swap in a fresh filter when needed. You can find them here

Yes. The Alexapure Pro can use up to four filters at once—and every filter you add gives you two benefits: faster flow and more filtration capacity.

Two filters provide approximately twice the flow rate and up to 400 gallons of combined filtration capacity. Install four, and you can get approximately four times the flow rate and up to 800 gallons of combined capacity before replacement.

That means less time waiting for filtered water and longer between filter changes, giving you more filtration capacity already in place when clean water matters most.

Yes. Alexapure Pro can filter freshwater from your tap, private well, lakes, rivers and streams—giving you a way to keep filtering when your normal water supply is unsafe, unavailable or simply not an option.

That’s also why we tested beyond everyday tap-water contaminants. Alexapure Pro was tested for bacteria, Giardia- and Cryptosporidium-sized cysts, turbidity, particulates, agricultural chemicals and other contaminants that can become especially important when relying on compromised or untreated freshwater sources.

For water known or suspected to be microbiologically unsafe, follow any applicable boil-water or disinfection guidance in addition to filtration. Alexapure Pro is designed for freshwater only and should not be used with saltwater.

The new Alexapure Pro builds on the gravity-fed system customers have trusted for years with meaningful upgrades to filtration, speed, capacity and ease of use.

The all-new filter delivers 2X faster flow, requires no priming, and has undergone Alexapure’s most extensive testing program yet, covering 220+ contaminants across 12 essential categories. The upper and lower chambers have also been expanded from 2.25 to 2.5 gallons, all while providing an under-cabinet footprint.

Production of the filters is now entirely performed by Alexapure, here in the US, giving the greatest control over manufacturing and quality from start to finish.

It’s everything learned from more than a decade of Alexapure built into the next generation.

Yes. The new Alexapure Pro is designed to work with both generations of filters. The new system includes adapters that allow you to use original Alexapure Pro filters, so any filters you already have on hand don’t go to waste.

And compatibility works both ways. The new Alexapure Pro filters quick-connect adapters that allow them to be used with the original Alexapure Pro system.

Either way, you're covered to use what you already have on hand.

Alexapure Pro is designed for simple upkeep. Clean the stainless steel chambers periodically with fresh water, mild soap and a soft cloth. If you notice buildup on the filter or a decrease in flow, remove the filter and gently clean the exterior under running water—never use soap or detergent on the filter.

After cleaning, reassemble the system and make sure all connections are secure before refilling. With routine care, your Alexapure Pro is ready to keep filtering whenever you need it.

No. Unlike Reverse Osmosis, distillation, or deionization systems, Alexapure Pro is designed to target unwanted contaminants without stripping your water of its naturally occurring dissolved minerals. In-house testing showed that overall dissolved mineral levels remained consistent before and after filtration.