Alexapure Pro Replacement Parts Kit

To ensure your Alexapure Pro water filtration system is always running at its peak, it's a good idea to keep a backup spigot. These parts may go missing in transport during an emergency. Over time, they may need replacing, especially with use in rough terrain or tough weather conditions. Keep a replacement spigot on hand for that "just in case" scenario. That way you can ensure peak operation of your Alexapure Pro filtration system's ability to bring filtered water to your family.

For Superior Flow & Fast Filtration The Alexapure Pro® Water Filtration Super Flow Kit was created to maximize the flow rate and filtration capacity of our innovative Alexapure Pro Water Filtration System. When all four filters are in use, you can quadruple your flow rate and significantly increase your filtration capacity**. The Alexapure Pro transforms water from virtually any freshwater source into drinkable water. Reduces 206 contaminants** commonly found in drinking water including: Bacteria (> 99.9999%) Chlorine & Vinylchloride (>99.9%) Fluoride (> 97%) Pesticides (> 95%) Pharmaceuticals (> 95%) Viruses (>99.99%) Heavy metals Lead Click here to see the test results! You won't survive without water for more than three days. How do you know yours is filtered enough to drink? The Alexapure Pro® Water Filtration System—with its groundbreaking gravity-powered filtration process—is the ultimate solution for drinkable water. And we offer it at an affordable cost. You can trust Alexapure to supply filtered water for your family. We do for ours! 1 Alexapure Pro Filtration System with 1 Filter Included 3 extra Alexapure Pro Genuine Replacement Filters to maximize your flow rate and filtration capacity Features of the Alexapure Pro Super Flow Kit Reduces 206 contaminants** commonly found in drinking water Verified* filtration capacity of 200 gallons Water storage capacity of 2 1/4 gallons Stainless steel construction Easy assembly Low maintenance Gravity powered Extended filter life with daily use Genuine replacement filters are simple to install Steel spigot provides instant access to pure water The Alexapure Pro Filter reduces 206 contaminants** commonly found in drinking water fom a variety of sources. Click the button below to see the lab results! Test Results What's in The Box (4) Alexapure® gravity block genuine filters with hybrid ceramic shells Installation hardware: (1) Non-slip black rubber base ring (1) Stainless steel upper chamber (1) Stainless steel lower chamber (1) Stainless steel lid (1) Steel spigot assembly (1) Knob assembly (3) Food grade nitrile/silicone rubber plugs Instructions for assembly and use 30-day No Questions Asked Guarantee We stand behind the Alexapure Pro Water Filtration System with an unprecedented warranty program:We extend a 30-day, no questions asked return policy on unopened products. After 30 days, or for products already opened, we will review your return request on a case-by-case basis. Our goal is to ensure you have a pleasant experience from start to finish! Performance of filters may vary due to source water conditions, water turbidity and seasonal water conditions. Cleaning the chambers The outer surfaces of your stainless steel Alexapure Pro chambers are easy to keep clean by dusting with a soft cloth. Prior to your first use, rinse the interiors with cool, clean water. Cleaning the exterior of the filters Mineral content in untreated water may cause build up on the hybrid ceramic shell of the Alexapure filter unit. While this in no way affects the filtration process, you can clean the outer surfaces of your filters. Be sure to carefully remove them from the upper chamber first. Scrub them with a scour pad (no soap) and clean water, rinse thoroughly and replace them in the upper chamber. Changing the filters Our revolutionary Alexapure gravity block filter works hard to make your family's drinking water cleaner and safer. Plan to change your filter when you begin to notice a drastic change in flow rate through the filter. For independent lab test results for the Alexapure Pro, click below: Alexapure Pro water filtration system reduces 206 contaminants** *Capacity is determined under controlled laboratory conditions and established protocols. Your conditions may vary based on target contaminant and influent water quality. **Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary. This system has been tested for the reduction of the substances listed in the product test data sheets. The concentration of the indicated substances in water entering the system was reduced to a concentration less than equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53. Minimum substance reductions are listed on the provided test data sheets for testing up to 200 gallons. System and installation to comply with state and local laws and regulations. Do not use with water that is microbiologically unsafe or unknown quality without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 Compliant certified coconut shell carbon and raw materials. For the best results, store replacement filters at temperatures above 35°F. Keep the filter moist and from drying out at all times for maximum filtration capacity. PERFORMANCE:  Performance claims are based on independent lab results and manufacturer’s internal test data*. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance claims are based on a complete system, including a filter and housing. This filter must be operated according to the system’s specifications to deliver the claimed performance. It is essential to follow operational, maintenance, and filter replacement requirements as directed for each application for this filter and system to perform correctly. Read the Manufacturer’s Performance Data Sheet accompanying the system and change the filter as suggested. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water. WARRANTY:  LIMITED LIABILITY: Alexapure, LLC makes no warranties of any kind, expressed or implied, statutory, or otherwise, and expressly disclaims all warranties of every kind, concerning the product, including, without limitation, warranties of merchantability and fitness for a particular purpose, except that this product should be capable of performing as described in this product’s data sheet. Alexapure’s obligation shall be limited solely to the refund of the purchase price or replacement of the product proven defective, in Alexapure’s sole discretion. Determination of suitability of this product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability.

Four Times the Filtration Power With the capacity to hold up to four filters at once, this four-pack of Alexapure Pro Genuine Replacement Filters will keep your water flowing at an optimal speed. Or, if you're satisfied with using one or two filters at a time, you can store this pack as backup for when your filters need a change!   Filtered Water That Just Tastes Better With the Alexapure Pro® Water Filtration System, you get filtered water that tastes better. For this and more, count on authentic Alexapure® products. Alexapure is the only brand of gravity-fed and portable water filters we carry because we know you expect the very best. You can trust Alexapure to supply filtered water for every member of your family—we do!   Keep Filtered Water Flowing The Alexapure Pro can house up to 4 filters, allowing you to increase the flow rate exponentially without sacrificing water quality. With this 4-pack of filters, you have everything you need for fast filtration! When you notice a drastic change in the flow rate of your Alexapure Pro, it's time to change the filter(s). Use only Alexapure Pro Genuine Replacement Filters to ensure the highest quality results. Each filter has a verified* filtration capacity of 200 gallons. Features Designed for exclusive use in the Alexapure Pro Water Filtration System Proprietary gravity-block, ionic-absorption technology Silver-Infused Outer Carbon Block Ready right out of the box and no priming necessary Reduces 206 contaminants** commonly found in drinking water:   Bacteria (> 99.9999%) Chlorine (> 99.9%) Fluoride (> 97%) Pesticides (> 95%) Pharmaceuticals (> 95%) Viruses (> 99.99%) Heavy metals Lead Click here to see independent test results of the Alexapure Pro Water Filtration System's performance. Package Contents (4) full-size Alexapure Pro Genuine Replacement Filters (4) sets of installation hardware   Changing the Filter Remove the lid from the upper chamber. Remove the empty upper chamber, steadying the old filter in one hand. Reach beneath the filter and remove the wing nut holding the unit in place. Slide out the old filter and discard it. Remove the new filter from its packaging. Unscrew the plastic wing nut, leaving the washer in place. (This filter is packed in an alcohol and water mixture to ensure it is microbiologically sterile.) Thread the stem of the filter through one of the four holes in the floor of the upper chamber, taking care to hold the filter straight. Secure the filter beneath by replacing the plastic wing nut. No need to pre-prime your new filter; your Alexapure Pro is ready to use right away!   Care and Cleaning Each Alexapure Pro Genuine Replacement Filter provides long-term performance with little maintenance. If you notice buildup on the surface of the ceramic filter shell, carefully remove the filter. Use a non-abrasive pad and fresh water—without soap—to clean the unit. Then, put the filter back in place.   Our Guarantee We extend a 30-day, no-questions-asked return policy on unopened products. After 30 days—or for products already opened—we will review your return request on a case-by-case basis. Our goal is to ensure you have a pleasant experience from start to finish!    *Capacity is determined under controlled laboratory conditions and established protocols. Your conditions may vary based on target contaminant and influent water quality. **Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary. This system has been tested for the reduction of the substances listed in the product test data sheets. The concentration of the indicated substances in water entering the system was reduced to a concentration less than equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53. Minimum substance reductions are listed on the provided test data sheets for testing up to 200 gallons. System and installation to comply with state and local laws and regulations. Do not use with water that is microbiologically unsafe or unknown quality without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 Compliant certified coconut shell carbon and raw materials. For the best results, store replacement filters at temperatures above 35°F. Keep the filter moist and from drying out at all times for maximum filtration capacity. PERFORMANCE: Performance claims are based on independent lab results and manufacturer’s internal test data*. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance claims are based on a complete system, including a filter and housing. This filter must be operated according to the system’s specifications to deliver the claimed performance. It is essential to follow operational, maintenance, and filter replacement requirements as directed for each application for this filter and system to perform correctly. Read the Manufacturer’s Performance Data Sheet accompanying the system and change the filter as suggested. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water. WARRANTY: LIMITED LIABILITY: Alexapure, LLC makes no warranties of any kind, expressed or implied, statutory, or otherwise, and expressly disclaims all warranties of every kind, concerning the product, including, without limitation, warranties of merchantability and fitness for a particular purpose, except that this product should be capable of performing as described in this product’s data sheet. Alexapure’s obligation shall be limited solely to the refund of the purchase price or replacement of the product proven defective, in Alexapure’s sole discretion. Determination of suitability of this product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability. Please be advised that, for returns of opened-box Alexapure Pros within the 30-day return window, a restocking fee of $75 may be incurred.

The Fully Loaded Filtration System You've Been Waiting For The Alexapure Pro Water Filtration Ultimate Flow Kit includes every accessory you need to operate the unit, giving you the ultimate in convenience, performance, and longevity. When all 4 filter ports are in use, you can quadruple your flow rate and significantly increase your filtration capacity**. The Alexapure Pro Ultimate Flow Kit includes: 1 Alexapure Pro Water Filtration System with 1 filter included 3 Extra Genuine Replacement Filters to maximize your flow rate and filtration capacity 1 Alexapure Pro Stainless Steel Stand 1 Alexapure 5-Gallon Collapsible Tote Features of the Alexapure Pro Water Filtration Ultimate Flow Kit: Up to 4x flow rate vs. single filter Reduces 206 contaminants** commonly found in drinking water: Fluoride - >97% Chlorine &  Vinylchloride - >99.9% Viruses - > 99.99% Bacteria - > 99.9999% Pesticides & pharmaceuticals - >95% Heavy metals Lead Entirely gravity-fed and ideal for off-grid or emergency use Plus, buying the Ultimate Flow Kit saves you money versus buying separately. You won't survive without water for more than three days. How do you know yours is drinkable? The Alexapure Pro® Water Filtration System—its groundbreaking gravity-powered filtration process—is the ultimate solution for consumable water. And we offer it at an affordable cost. You can trust Alexapure to supply drinkable water for your family. We do for ours! The Details Reduces 206 contaminants** commonly found in drinking water Verified* filtration capacity of 200 gallons Water storage capacity of 2 1/4 gallons Durable stainless steel construction Easy assembly and maintenance Comes with pre-primed, ready-to-use filters  Can hold up to 4 filters at once Convenient stainless steel spigot for instant access to filtered water 10-inch upper chamber 10 1/8-inch lower chamber 21 1/2-inch assembled height (from bottom to top handle) Weighs under 8 pounds Did You Know? The Alexapure Pro's filter reduces 206 contaminants** commonly found in drinking water while still preserving essential trace minerals. It makes your water consumable and better tasting!Click here to see the independent lab results! What's in the Box (1) Alexapure® gravity block filter with hybrid ceramic shell Installation Hardware: (1) non-slip rubber base ring (1) stainless steel upper chamber (1) stainless steel lower chamber (1) stainless steel lid (1) stainless steel spigot assembly (1) knob assembly (3) food-grade nitrile and silicone rubber plugs (1) set of instructions  Our Guarantee We stand behind the Alexapure Pro Water Filtration System! We extend a 30-day, no-questions-asked return policy on unopened products. After 30 days—or for products already opened—we will review your return request on a case-by-case basis.    Note: Performance of filters may vary due to source water conditions, water turbidity, and seasonal water fluctuations. Keep the filter moist and protected from drying out at all times for maximum filtration capacity. For the best results, store replacement filters at temperatures above 35°F. Cleaning the Chambers The exterior of each stainless steel chamber is easy to keep clean: simply dust with a soft cloth. Prior to first use, rinse the interior of each chamber with cool, clean water. Cleaning the Filters Mineral content in untreated water may cause mineral buildup along the hybrid ceramic shell protecting your filter. While this does not impact the filtration process or water quality, you can clean the filter's exterior if desired. Exercise special care when removing the filter from the upper chamber. Scrub the filter's exterior with a scour pad and clean water—without soap—then rinse thoroughly and replace in the upper chamber. Changing the Filters When you begin to notice a drastic change in water flow rate, it's time to replace your Alexapure Pro Water Filtration System's filter. Make sure to change your filter regularly to ensure your system is performing optimally. Click here to purchase an Alexapure Pro Genuine Replacement Filter. *Capacity is determined under controlled laboratory conditions and established protocols. Your conditions may vary based on target contaminant and influent water quality. **Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary. This system has been tested for the reduction of the substances listed in the product test data sheets. The concentration of the indicated substances in water entering the system was reduced to a concentration less than equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53. Minimum substance reductions are listed on the provided test data sheets for testing up to 200 gallons. System and installation to comply with state and local laws and regulations. Do not use with water that is microbiologically unsafe or unknown quality without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 Compliant certified coconut shell carbon and raw materials. For the best results, store replacement filters at temperatures above 35°F. Keep the filter moist and from drying out at all times for maximum filtration capacity. PERFORMANCE:  Performance claims are based on independent lab results and manufacturer’s internal test data*. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance claims are based on a complete system, including a filter and housing. This filter must be operated according to the system’s specifications to deliver the claimed performance. It is essential to follow operational, maintenance, and filter replacement requirements as directed for each application for this filter and system to perform correctly. Read the Manufacturer’s Performance Data Sheet accompanying the system and change the filter as suggested. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water. WARRANTY:  LIMITED LIABILITY: Alexapure, LLC makes no warranties of any kind, expressed or implied, statutory, or otherwise, and expressly disclaims all warranties of every kind, concerning the product, including, without limitation, warranties of merchantability and fitness for a particular purpose, except that this product should be capable of performing as described in this product’s data sheet. Alexapure’s obligation shall be limited solely to the refund of the purchase price or replacement of the product proven defective, in Alexapure’s sole discretion. Determination of suitability of this product for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. Use of this product constitutes Buyer’s acceptance of this Limited Liability. Please be advised that, for returns of opened-box Alexapure Pros within the 30-day return window, a restocking fee of $75 may be incurred.